Finance Hy-Brid scissor lifts and push-around lifts from $50k. HB-1030, HB-1430, and PA-1030 closing after file completion. non-prime credit reviewed, application-only to $400k.
Hy-Brid Lifts, built by Custom Equipment in Richfield, Wisconsin, occupies a specific and narrow segment: low-level access platforms in the eight-to-fourteen-foot working-height range. That sounds like a minor niche until you consider how many commercial building maintenance tasks happen between eight and fifteen feet. Retail fixture work, drop-ceiling tile replacement, HVAC filter service, paint touch-up in big-box stores: those jobs do not need a 26-foot scissor. They need something light, maneuverable, and approved for floor loading limits that a full-size lift would exceed.
We fund Hy-Brid units, including the HB-1030, HB-1430, and PA-1030 push-around, from a $50k floor on multi-unit orders. Application-only to $400k. challenged credit is reviewed. Most fleet purchases close after seller documents are ready.
Hy-Brid Lift Models: Low Height, High Utility
The Hy-Brid HB-1030 reaches 10-foot working height from a self-propelled electric platform weighing approximately 1,300 pounds. That weight is the defining feature: a typical full-size slab electric at working height weighs three to four times more. The HB-1030 can access areas of finished retail floors, hospital corridors, and occupied office buildings that would be off-limits to heavier equipment. It fits through standard 36-inch doorways without stowing or modification.
The Hy-Brid HB-1430 adds four feet of working height at 14 feet and a slightly longer platform, making it suitable for taller interior spaces including warehouse mezzanine underdecks and tall retail environments. The extra reach matters in big-box stores where ceiling fixtures run at 12 to 13 feet and a 10-foot unit falls just short.
The Hy-Brid PA-1030 is a push-around non-propelled unit: no drive system, manually positioned, and even lighter than the self-propelled models. It is the lowest-cost option in the line and is specified when the operator can position it manually rather than needing to drive it under elevated obstacles.
The Right Buyer for Hy-Brid Equipment
Facilities maintenance teams at large retail chains, hospital systems, and commercial property portfolios are the core Hy-Brid buyers. These groups maintain dozens or hundreds of buildings and need lightweight, floor-safe access platforms that can be transported in a cargo van or a small box truck between sites. A Hy-Brid unit fits both requirements.
Property management companies overseeing mixed-use commercial portfolios maintain the same access needs across multiple buildings without wanting to rent every time. Buying a small fleet of low-level units and deploying them across a portfolio is often cheaper than renting at the frequency these crews operate.
Retail fit-out and fixture installation contractors also run Hy-Brid units because retail construction schedules often prohibit heavier equipment during occupied hours. A Hy-Brid can be moved with the operator pushing it by hand and creates no floor loading concern on finished slabs. That makes it the only viable option for many in-store renovation scopes.
Multi-unit fleet purchases are where the financing becomes meaningful. A property management company equipping ten buildings with two units each is a $180,000 to $250,000 order that funds application-only. A retail chain outfitting twenty stores with one unit each is similar in scale. We size the deal to the fleet, not the individual unit.
Pricing and Financing Structures for Hy-Brid Fleets
New Hy-Brid HB-1030 units list costing on the order of $13k to $17k. New HB-1430 units run slightly higher. The PA-1030 push-around is the lowest-cost entry in the line. Individual unit prices fall below our $50k floor, which means single-machine purchases are outside our program. Fleet purchases of four or more units typically cross the threshold.
A fair-market-value lease or a dollar-buyout lease suits many Hy-Brid fleet buyers, particularly retail and property management groups who want to match the payment to a maintenance budget line rather than capitalize the full purchase. The lease structure keeps monthly costs predictable across the fleet life.
Used Hy-Brid units are less common in the secondary market than full-size scissors, but they do appear through facilities liquidations and equipment dealers. We fund used Hy-Brid units on the same structure as new. The machine's condition and hours matter for valuation; the HB-1030 and HB-1430 have relatively low maintenance profiles and used units in good condition hold value reasonably well.
Fund a Hy-Brid Fleet Order
Fleet orders for Hy-Brid units cross our $50k floor easily at four units or more. current operating bank statements plus a one-page application starts the process. We close after seller documents are ready and B and C credit files are considered. Tell us the model mix and the unit count and we will quote the deal.
Questions operators ask
Clear answers before the lift moves.
Open a question for the practical details on equipment, documents, timing, and structure.
Can I finance a single Hy-Brid unit, or is a fleet purchase required?
Our $50k floor means single Hy-Brid units at $13,000 to $17,000 each are outside our program individually. Fleet orders of four or more units typically cross the floor. If you are buying other equipment at the same time, bundling the purchases may also work.
Do Hy-Brid lifts qualify as scissor lifts for financing classification purposes?
Yes. Hy-Brid units are scissor-mechanism platforms and are classified as aerial work platforms for financing purposes. The same lender categories that cover full-size scissors apply to Hy-Brid equipment.
Our facilities team manages 40 buildings. We need one unit per building. Can we fund that as one deal?
A 40-unit order at $13,000 to $17,000 per unit lands costing on the order of $520k to $680k. That exceeds the application-only ceiling of $400k, so we would need business financials. Three years of tax returns or two years of P&Ls is typical at that level. The deal is very much fundable; it just requires more documentation.
We already own twelve Hy-Brid units outright. Can we pull equity out of them?
A sale-leaseback is possible if the total fleet value is above $50k. We assess current market value on the fleet and structure the leaseback accordingly. It is less common with Hy-Brid units than with larger equipment, but the structure is available.
How does the floor-load consideration affect financing? Does lender care about floor loading ratings?
Lenders do not evaluate floor-load ratings for financing purposes; that is the operator's compliance responsibility. What matters for underwriting is the machine's value, condition, and the borrower's financial profile. The floor-load advantage of Hy-Brid is a market and use-case factor, not a financing factor.
Related paths
More scissor lift financing routes
Hy-Brid HB-1030 Scissor Lift Financing
Review
Hy-Brid HB-1430 Scissor Lift Financing
Review
Hy-Brid PA-1030 Push-Around Lift Financing
Review
Scissor Lift Financing for Facilities Maintenance Teams
Review
Scissor Lift Financing for Property Management Companies
Review
Fair Market Value (FMV) Lease for Scissor Lifts
Review
$1 Buyout Lease for Scissor Lifts
Review
Scissor Lift Equipment Lease
Review